Pool automation system is a smart solution that centrally controls filtration, chemical dosing, heating, and lighting from a single control point.

Pool Automation Systems

Pool maintenance and operation is a task that requires time and constant attention. In order for your pool to be constantly clean and healthy, it needs attention like a constant baby care. Pools that cannot be maintained on time will react instantly and cause an unhealthy water quality.

Chemical dosing not done in time, backwash sweep, brushing, etc. situations such as these cause the pool water to become degraded and contaminated. Therefore, especially our family or guests will have to swim in an unhealthy environment. The better and more fun swimming in a healthy swimming pool, the more bad it is to swim in an unhealthy and dirty pool.

The water quality of a healthy swimming pool must be of drinking water quality. To do this, the operating maintenance instructions required to comply with the water quality requirements set out in the regulations of the Ministry of Health must be carried out on time. If maintenance is disrupted, water quality will change momentarily.

The pool automation system will undertake maintenance that you are unable to perform on time due to your work intensity or for various reasons. It will even ensure that pool water is healthy water in the quality of the drinking water, and it will continuously control your pool as a momentary safe autocontrol.

Pool maintenance is now much easier with the pool auto control system. The pool automation system will automatically run the pool, so whether you're on the watch screen or on your smartphone, tablet or PC, you can track it at any time. You'll be able to control it with remote tracking without leaving your seat. You will also be able to personalize this system in line with the demands you want.

The automation system, which constantly monitors the pool system, generates warnings when intervention is required and allows the pool operator to perform the necessary interventions.

With pool automation systems, you will be able to monitor or control the following topics at your request

Pool Automation System Catalog

The Pool Automation System is a smart solution that allows you to manage all technical processes of your pool from a single control center. Critical functions such as water temperature, filtration, lighting, and chemical dosing are automatically controlled. This ensures energy savings while reducing operating costs. With its user-friendly interface, the system offers easy installation and practical operation. Thanks to real-time monitoring, pool parameters can be tracked instantly. Potential malfunctions or abnormal conditions are reported to the user through early warning notifications. It helps keep pool water hygienic and properly balanced at all times. With its durable structure and reliable software infrastructure, it provides long-lasting and trouble-free operation.

Download the Catalog (PDF)

What is checked with Pool Automation Systems?

Filtration Pump Control
Sand Filter Control
Backwash and Rinse System
Automatic Disinfection System Control
Dosing Pump Controls
Chemical Tank Monitoring
UV Disinfection System Control
Heating System Control
Lighting System Control
Balance Tank Water Level Control
Pool Cleaning Control
Automatic Motorized Valve Controls
Dry-Run Protection Safety Control
System Pressure Safety Control
System Flow Rate Control

1- Filtration Pumps Control:

Depending on the size of your pool, the number of recirculating pumps in the system can be 1 or more. Accordingly, the start time of the commissioning of the recirculation pumps and the closing time of the evening can be changed infinitely via the system, depending on your request.

2- Sand Filter Control:

Depending on the size of the sand filter, the system may be equipped with an automatic six-way valve or a five-way valve group. Although these systems differ in structure, they serve the same purpose. This system monitors and controls the operating status of the filtration system, real-time filter contamination, instant pressure levels, and inlet and outlet flow rates of the filter. Based on the level of filter contamination, the system automatically switches from filtration mode to backwash and rinse modes, and then returns to the initial filtration position. By continuously monitoring pressure values, the system can stop operation before any potential issues occur in the filter or piping and notify the pool operator with an alert. Using flow meters installed at the sand filter inlet and outlet, the system automatically monitors the incoming and outgoing water flow rates pumped through the system and responds accordingly to any decreases or increases in flow, informing the pool operator when necessary.

3- Backwash and Rinse:

Sand filters must be backwashed and rinsed depending on the level of contamination. The system is designed to automatically detect filter contamination and initiate the backwash and rinse processes accordingly. After completing the backwash and rinse cycles for the predefined duration set via the PLC, the system automatically returns to the initial mode (filtration position). In some cases, filter contamination may take a long time to occur. To ensure a healthy and efficient system, the automation is designed to perform backwash and rinse operations up to four times per month regardless of the contamination level. The monthly backwash schedule can be freely configured via the PLC settings menu, allowing the system to perform the operation 1, 2, 3, or 4 times per month as desired.

Ters Yıkama ve Durulama Nasıl Yapılır? - Artemis Havuz ve Fıskıye Sistemleri

4- Automatic Disinfection System Control:

Redox, pH, and chlorine regulator controls can be managed via the PLC. The values measured by the chlorine–pH regulator can be monitored in real time through the PLC interface using a touchscreen, smartphone, tablet, or external computer.

5- Dosing Pump Control:

Dosing pumps are monitored by the system after the relevant values are checked. Their operating status is continuously tracked to ensure proper and efficient operation.

6- Chemical Tank Control:

Chemical tanks are monitored in real time for chemical level control, ensuring uninterrupted and trouble-free system operation. The liquid levels inside the chemical containers are displayed instantly on the PLC screen. In the event of any abnormal condition, the system will stop automatically and notify the operator with an alert message.

Antech marka ph ve Klor Otomastik Dezenfeksiyon Sistemi- Artemis Havuzculukta

7- UV Disinfection System:

The UV disinfection system is continuously monitored in real time via the automation system to ensure pool water hygiene. The system constantly controls the operating status of the UV lamps, their active runtime, and performance values. In the event of a malfunction, performance drop, or system shutdown, the automation system safely stops the process and immediately informs the user with on-screen warnings and alert messages. This ensures that the pool water disinfection process remains under continuous control and hygiene standards are consistently maintained. The regular and safe operation of the UV system also contributes to optimizing chemical consumption.

UV Dezenfeksiyon Sistemi - Artemis Havuz

8- Heating System Control:

The system maintains the pool water temperature at the desired level. Once the target water temperature is set, the heating system automatically activates when the temperature drops by 2 degrees. When the pool water reaches the set temperature again, the system stops heating and keeps the temperature stable. The pool water temperature can also be monitored in real time via the PLC screen.

MITT Marka Plakalı Isı Eşanjörleri - Artemis Havuz ve Fıskıye Sistemleri

9- Lighting System Control:

The pool lighting system is designed to operate and shut down within the desired time intervals. Unlimited operating time schedules can be easily set via the PLC settings panel.

Havuz Led Lambalarında Timer Kontrolü - Artemis Pool Systems

10- Balance Tank Water Level Control:

The water level in the balance tank is maintained at the desired level. In case of water level decrease, the system automatically refills the balance tank until it reaches the set level. If the water level reaches critical limits, the pumps are automatically disabled. The balance tank water level can also be monitored in real time via the PLC screen, and in case of any issues, the system will stop and notify the user with a message.

Denge Tankı Su Seviye Kontrolü - Artemis Havuzculuk

11- Pool Cleaning Control:

For this system, the PLC automatically switches the valves to the vacuuming position to enable pool cleaning. A pool operator is required to perform the cleaning process. Pool cleaning can also be carried out using automatic pool cleaning robots.

Otomatik Havuz Temizliği - Artemis Havuzculuk

12- Automatic Motorized Valve Control:

The motorized valves in the pool system will open the valves that need to be opened and close the valves that need to be closed during system transitions. At the same time, the system continuously monitors the valve positions in real time. After the valves reach the correct positions, the system sends the start command to the pumps. If the motorized valves do not reach the correct position, the system will not allow the pumps to start. Valve positions can be monitored instantly via the PLC screen, and in case of any malfunction, the system will stop operation and notify the operator with a message.

Otomatik Motorlu Vana - Artemis Havuzculuk

13- Dry-Run Protection Safety Control:

Water level controls in the pool and balance tank are monitored in real time. Pumps in the pool system must never operate without water. To detect such issues in advance and prevent potential damage, water level sensors installed at critical points ensure system safety.

14- Pressure Safety Control:

Sudden pressure increases that may occur in the piping system can damage the system. To detect such issues in advance and prevent potential failures, pressure transmitters installed at critical points continuously monitor pressure levels and ensure overall system safety.

Basınç Transmitteri - Artemis Havuzculuk

15- System Flow Rate Control:

Flow meters installed at designated points monitor the pump discharge flow rate as well as the inlet and outlet flow rates of the sand filters. In addition, flow meters installed on the main pool supply line enable monitoring of the total pool circulation flow rate. This ensures that the water entering and exiting the filters can be balanced evenly. All flow meter values can be monitored in real time via the PLC interface.

SMART POOL SYSTEMS

If desired, real-time monitoring and control of the pool automation system can also be managed via a computer from the central system room. Optionally, it can be operated through any internet-connected computer, touchscreen, or smartphone.

Touchscreen:

Real-time monitoring and control of the pool automation system can be carried out via a computer from the pool’s technical room. All system switching commands are managed fully automatically through this screen. The software, PLC, touchscreens, and commissioning required for pool automation will be provided by our company.

Designed for controlling pool systems from the mechanical room, it is resistant to humidity and moisture. Resistive, analog 800 × 600 pixel (SVGA), 12.1" TFT LCD, white LED backlight, color display, 16-bit resolution • Brightness adjustable via touchscreen or software. IP65/IP66/NEMA4X (panel-mounted).

POOL PLC AUTOMATION CONTROL

Password:

Pool control is provided only by authorized personnel. For this reason, the login screen is designed to be password-protected. Unauthorized users can only monitor the system via the screen and cannot intervene in system settings or control functions. This structure increases system security and prevents possible misuse and risks.

Settings:

You can access all settings related to the automation system by tapping the settings button shown in the image. In this section, system operating parameters, scheduling settings, and control options can be easily and securely configured based on user authorization levels.

Settings – 1, 2, 3,:

After entering the settings section, the date and time must be checked to ensure proper system operation. To adjust the date and time, simply click once on the relevant field and enter the current date or time in the dialog boxes that appear.

During the specified daytime and nighttime operating periods, the system will activate the number of pumps defined in the next settings section for day and night operation. This allows the system to run at full capacity during the day and at the desired level at night, ensuring that the pool’s chemical balance and temperature values remain stable.

In addition, daytime and nighttime operating power levels can be defined. Pump frequency settings for day and night operation can also be adjusted.

For pool vacuuming operations, the pump power capacity can be adjusted on this page to prevent hose collapse and to ensure more efficient and effective cleaning.

In the second settings section, there is a shutdown pressure parameter defined as the RED ALARM. This part is programmed so that the system automatically shuts itself down at 1.4 bar. The button is for monitoring purposes only and is not activated.

By entering the maximum backwash pressure value, the system ensures that backwashing starts automatically when the filters reach this pressure during operation. In addition, it is possible to define how many filters and pumps will operate during backwashing and rinsing, as well as their operating duration. Even if the filters are not dirty, automatic backwashing and rinsing should be carried out at regular intervals each month. For this purpose, automatic backwash and rinse cycles can be scheduled up to a maximum of 4 times per month by selecting days between 1 and 28 (due to February). Simply entering the desired days into the on-screen button is sufficient. If the system consists of multiple groups, the start time of the next group after the first backwash cycle can also be defined here.

At the bottom section, there are buttons used to activate or deactivate the pumps and filters. If a pump or filter experiences a fault or requires maintenance, it can be temporarily disabled with a single click until the issue is resolved. When equipment is taken out of service, its button will be highlighted in RED on the screen.

In the lower area, the pumps operate in a redundant mode using an equal run-time (duty rotation) method. This ensures balanced usage and extended equipment life. The operating hours of each pump can also be monitored in this section.

Settings – 4:

The lower and upper limit values for pressure, as well as the minimum and maximum limits for flow meters, can be defined in this section. When pressure limits are set within safe operating ranges, real-time pressure monitoring helps prevent potential issues caused by sudden pressure increases in the piping and system.

By configuring the flow meter limits, the system ensures accurate control of the water flow passing through the installation, providing a balanced and homogeneous water circulation throughout the pool system.

Settings – 5:

Water temperature control is provided in this section. By entering the desired pool water temperature, the system maintains the water at the set temperature. Keeping the pool water constantly at the desired temperature ensures a more comfortable and enjoyable swimming experience.

The screen saver can be activated to switch the system to sleep mode if desired. While the screen is dimmed, the system continues to perform all operations automatically in the background. When the screen saver is active, touching the screen allows access to monitoring and settings again. If no further action is taken, the system will automatically switch to sleep mode within 10 minutes.

Pool Automation System – Monitoring Page

Pool Automation System – Filtration System Page

Pool Automation System – Pool Vacuuming Page

Pool Automation System – Pool Draining Page

Pool Automation System – Balance Tank Draining Page

Our Blog Posts

Up-to-date blog articles about our areas of expertise and application solutions.

Pool Filtration Systems and Equipment

The foundation of clear, hygienic, and safe water in swimming pools is a proper filtration system. In this article, we explain filter types, pump and balance tank selection, automation and energy-efficient solutions, as well as maintenance tips.

Water Loss Calculation and Evaporation Analysis in Pools

Water loss in open-surface pools is caused by evaporation and backwash processes. While sun exposure, wind, temperature, and humidity affect evaporation, the frequency of filter backwashing determines operational water loss.

The Power of Ornamental Pools and Landscape in Architecture

Ornamental pools add aesthetic value, acoustic comfort, and spatial integrity to projects. Through reflection, light, and the sound of water, they make architecture more dynamic and tranquil.

Energy and Time Savings with Pool Automation

Pool automation is the foundation of modern pool management in terms of chemical balance, energy efficiency, water quality, and safety.

Our Reference Videos

Short highlights from our real projects.

Free price quote for pool projects - Artemis Pool

E-Catalog

As Artemis Pool & Fountain Systems, you can access detailed information about our products, applications, and fields of activity through our E-Catalog. Our engineering-focused solutions and professional services in compliance with international standards are summarized in this catalog.

Download the Catalog (PDF)